• 2 - C.313
• 1 - M.202
• 1 - Roadcase
• All cables

C.313

Description	Measurement
Frequencey Response	20 Hz to 20 kHz +/- 1.0 dB
THD+N With 20 kHz Low Pass Filter	0.015% at 1 kHz
S/N Ratio: With 20 kHz Low pass filter and IHF-A Weighted	85dB
Output Level	+6 dBV (1 Vrms) +/- 1dB at 1kHz, 0dB
Channel Balance	Within 1 dB at 1kHz, 0dB
De-Emphasis Response	+3/-0 dB at 16kHz, -20 dB
Channel Separation: With 20 kHz Low pass filter and IHF-A Weighted	90 dB at 1kHz, 0 dB
Searching time: (Test Disc: TCD-792) Short Access Time: Long Access Time:	2 sec Play next Track 4 sec Track 1 to 20, 20 to 1
Playability: Interruption: Black Dot: Finger Prints: Eccentricity: Vertical Deviation:	0.7mm TDC-725 0.6mm TDC-725 65um TDC-725 140um TDC-712 W/O Track Jump 0.5mm TDC-731R
Power Supply	AC 120V, 60Hz, 15W
Dimensions	318 (W) x92(H) x358(D) mm
Weight	4.3 Kgs.

M.202

Description	Measurement
INPUT / OUTPUT IMPEDANCE & SENSITIVITY Line Phono Mic Master Phones	-14dB/10K OHM ±2dB -50dB /47K OHM ±2dB -60dB /2.2K OHM ±2dB 1K OHM 0dB/33 OHM ±2dB (LOAD=32 OHM)
MAX. OUTPUT (THD=1%) Master	MORE THAN +14dBV (8.0V)
CHANNEL BALANCE	WITHIN 3dB
FREQUENCY RESPONSE: (line)	20-20KHz ±2dB
OUTPUT NOISE (IEC-A WEIGHTED) (line to MST)	LESS THAN -90dBV
THD + N: (MASTER 0dBV OUTPUT, MAXIMUM GAIN, w/ 20kHz LPF) (line)	LESS THAN 0.05% 20 - 20KHz
Signal to Noise Ratio	<106dB
Crosstalk	LESS THAN -80dB AT 1KHz BETWEEN CHANNELS. (TERMINATED UNUSED INPUTS)
Mic EQ hi Low	±10 +/- 2dB AT 10KHz ±10 +/- 2dB AT 100Hz
Channel EQ	Hi 9 +/- 2dB AT 13KHz -15 +/- 3dB AT 13KHz Mid 9 +/- 2dB AT 1KHz LESS THAN -23dB AT 1KHz Low 9 +/- 2dB AT 70Hz -26 +/- 3dB AT 70Hz

Inputs/Outputs
Line Inputs	2 (RCA), -10dB/47K ohm
Phono Inputs	2 (RCA), -50dB/47K ohm
DJ Mic Input	1 (1/4"), -50dB/6K ohm
Master Output	1 (RCA), -10dB/47K ohm
Headphone Output	1 (1/4"), -3dB/33 ohms
Mic Tone	+/-10dB (Hi, Low)
Dimensions (LxWxD)	230 (W) X 267 (D) X 111 (H) mm
Weight	1.61Kgs (3.5 lbs.)