• 2 - T.50 w/ slip mats and dust covers
• 2 - 500B carts mounted on headshells
• 1 - M.201
• 1 - DJ PRO 90
• All cables

T.50

Turntable Section	Measurement
Frequency Response	30 Hz to 20 kHz +1/- 2 dB/ RIAA filter
THD+N	< 0.03% at 1 kHz
S/N Ratio: Line	<-65 dB
Type	2-speed full manual
Motor	DC motor
Driving Method	Belt Drive
Speeds	33 1/3 and 45rpm
Wow and Flutter	Less than 0.2% WRMS (JIS WTD) with 33 1/3 rpm
Pitch Controls	+/- 10%
Starting Time	Less than 1 sec with 33 1/3 rpm
Braking Time	Less than 1 sec with 33 1/3 rpm
Time for Speed Change	Less than 1 sec with 33 1/3 rpm Less than 1 sec from 45 to 33 1/3 rpm
Audio Output	Phono/Line output

Tone Arm Section	Measurement
Tone arm type	Static balanced straight shaped tone arm with cardan's suspension
Effective Arm Length	191mm
Tracking Force Range	0-4g
Applicable Cartridge Weight	6-10g

M.201

Description	Measurement
INPUT / OUTPUT IMPEDANCE & SENSITIVITY Line Phono Mic Master Phones	-14dB/10K OHM ±2dB -50dB /47K OHM ±2dB -60dB /2.2K OHM ±2dB 1K OHM 0dB/33 OHM ±2dB (LOAD=32 OHM)
MAX. OUTPUT (THD=1%) Master	MORE THAN +14dBV (8.0V)
CHANNEL BALANCE	WITHIN 3dB
FREQUENCY RESPONSE: (line)	20-20KHz ±2dB
OUTPUT NOISE (IEC-A WEIGHTED) (line to MST)	LESS THAN -90dBV
THD + N: (MASTER 0dBV OUTPUT, MAXIMUM GAIN, w/ 20kHz LPF) (line)	LESS THAN 0.05% 20 - 20KHz
Signal to Noise Ratio	<106dB
Crosstalk	LESS THAN -80dB AT 1KHz BETWEEN CHANNELS. (TERMINATED UNUSED INPUTS)
Mic EQ hi Low	±10 +/- 2dB AT 10KHz ±10 +/- 2dB AT 100Hz
Channel EQ	Hi 9 +/- 2dB AT 13KHz -15 +/- 3dB AT 13KHz Mid 9 +/- 2dB AT 1KHz LESS THAN -23dB AT 1KHz Low 9 +/- 2dB AT 70Hz -26 +/- 3dB AT 70Hz

Inputs/Outputs
Line Inputs	2 (RCA), -10dB/47K ohm
Phono Inputs	2 (RCA), -50dB/47K ohm
DJ Mic Input	1 (1/4"), -50dB/6K ohm
Master Output	1 (RCA), -10dB/47K ohm
Headphone Output	1 (1/4"), -3dB/33 ohms
Mic Tone	+/-10dB (Hi, Low)
Dimensions (LxWxD)	230 (W) X 267 (D) X 111 (H) mm
Weight	1.61Kgs (3.5 lbs.)